NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v3 User Manual
10 Basic Setup
v1.0, April 2007
Upgrading the Wireless Adapter Software
Upgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Go to http://kbserver.netgear.com
2. Click the latest version of upgrade.
3. Examine the Release Note. Make sure to read any warnings and Known Problems.
4. Download the upgrade using the link in the Release Note.
5. Follow the Release Note installation instructions.
To Next Page
Loading...
