6
Connect the WiFi Booster
To extend the range of your WiFi network, you need to connect
the WiFi Booster to your existing WiFi network. You have two
options to connect the WiFi Booster to your network.
Option 1: Connect with WPS (Wi-Fi Protected Setup)
WPS lets you easily join a secure WiFi network without typing
the network name and password. The WPS button is a
physical button on the WiFi router, gateway, or access point.
For more information, see page 7.
If your router supports WPS (Wi-Fi Protected Setup ),
NETGEAR recommends that you use Option 1; otherwise,
use Option 2.
Tip: WPS does not support WEP network security. If you
are using WEP security, use Option 2 to connect.
Option 2: Connect with the web browser setup guide
The web browser setup guide walks you through the
necessary steps to connect your WiFi Booster to an existing
WiFi network. For more information, see page 8.
To Next Page
Loading...
