Need help?Do you have a question about the NETGEAR WNCE4004 and is the answer not in the manual?
General| Device Type | Wireless Adapter |
|---|---|
| Frequency Band | 2.4 GHz / 5 GHz |
| Data Transfer Rate | 300 Mbps |
| Security | WEP, WPA, WPA2 |
| Antenna | Internal |
| Wireless Standard | IEEE 802.11n |
Details the physical components and LED indicators of the device.
Provides step-by-step instructions for installing and connecting the adapter.
Explains how to connect the adapter to a computer for settings adjustments.
Guides users through the Smart Wizard to connect to a wireless network.
Displays current operational status, network information, and settings of the adapter.
Shows performance metrics for LAN and WLAN ports, including packet counts and utilization.
Instructions for configuring the adapter's IP address dynamically or statically.
Options for saving, loading, and erasing adapter configuration settings.
Guide on checking for and installing new firmware versions for the adapter.
Configuration options for Fragmentation Length and CTS/RTS Threshold.
How to use the Push 'N' Connect (WPS) feature for simplified network connection.
Solutions for issues when the adapter's configuration page is inaccessible.
Troubleshooting steps for when the adapter fails to connect to wireless networks.
Procedure to reset the adapter to its original factory configuration.
Detailed technical features, standards, frequency ranges, power, and encryption.
Includes FCC statements, cautions, and RF exposure guidelines.
Specific regulatory compliance and operational cautions for Canada.
Official statement confirming the product's compliance with EU directives.
To Next Page
