Get Started and Connect to a WiFi Network
5
N600 WiFi USB Adapter
Package Contents
Your package includes the following items.
Adapter
Plastic cradle
Fasteners
USB cable
Resource CD
Install and Set Up NETGEAR genie
You can set up NETGEAR genie and use it to join a WiFi network. If you do not want to use
NETGEAR genie, you can install a Windows standalone driver and use the Windows WLAN
Autoconfig service or the Wireless Zero Configuration service to join a WiFi network. For
more information, see Install Windows Standalone Driver on page 7.
To set up NETGEAR genie:
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not include a CD drive, or if you cannot find your
resource CD, visit support.netgear.com. Click the Support for Home
button, type WNDA3100v3 in the search field, and locate and
download the standalone driver.
If the Resource CD screen does not display, browse the files on the CD and double-click the
Autorun.exe file.
The NETGEAR Resource CD screen displays.
2. Click the Setup button.
The Software Update Check screen displays.
3. Install the setup software using one of the following methods.
• Connected to the Internet. If you are connected to the Internet, click the Check for
Updates button.
After the software checks for updates, the Update Check Complete
screen displays. Click the Continue button. The Welcome screen displays.
• Not connected to the Internet. If you are not connected to the Internet, click the
Install from CD button.
The Welcome screen displays.
To Next Page
Loading...
Need help?
General