N600 Wireless Dual Band Router WNDR3400 User Manual
Safeguarding Your Network 2-21
v1.0, August 2010
1. Select Guest Network from the Setup menu. The Guest Network Settings screen appears
2. Define a guest network on either or both of your wireless networks from this same screen.
Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
– Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its name
(SSID) to all Wireless Stations. Stations with no SSID can adopt the correct SSID for
connections to this Access Point.
– Allow Guest to access My Local Network – If selected any user who connects to this
SSID can access local networks associated with the router like users in the primary SSID.
Figure 2-10
To Next Page
Loading...
