N600 Wireless Dual Band Router WNDR3400 User Manual
Using Network Monitoring Tools 4-11
v1.0, August 2010
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Managing the Configuration File
The configuration settings of the WNDR3400 router are stored within the router in a configuration
file. You can back up (save) this file to your computer, restore it, or reset it to the factory default
settings. From the main menu, under Maintenance, select Backup Settings.
The following sections describe the available options.
Backing Up and Restoring the Configuration
The Restore and Backup options in the Backup Settings screen let you save and retrieve a file
containing your router’s configuration settings.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.
Figure 4-8
To Next Page
Loading...
