N600 Wireless Dual Band Router WNDR3400 User Manual
Using Network Monitoring Tools 4-15
v1.0, August 2010
To turn off the wireless signal, for either wireless network (2.4Ghz or 5Ghz):
1. Select the Turn off wireless signal by schedule check box.
2. Click the Add a new period button. The following screen appears:
3. Click the Start drop-down menu and select the time that you want the wireless signal to turn
off. The times are shown in half hour intervals from midnight to 11:30 p.m.
4. Click the End drop-down menus and select the time that you want the wireless signal to turn
back on.
5. Select one of the following Recurrence patterns:
• Daily – The wireless network will be off every day for the time period you previously
specified.
• Select Days – The wireless network will be off on the days you select for the time period
you previously specified.
6. Click Apply.
Figure 4-11
Note: Whenever either wireless network goes on or off, an entry is made in the log.
To see log entries, from the Content Filtering menu, select Logs.
To Next Page
Loading...
