9
Video Mode
To prevent packet drops or jitter when streaming high-quality video,
NETGEAR recommends that you create a separate Wi-Fi network
on the 5 GHz radio band of your router, and connect all of your
media-streaming devices, or PCs that you use to stream video, to
this Wi-Fi network.
Step 1: Log in to your router management interface at
http://routerlogin.net.
Step 2: In the router management interface, go to the Basic tab
and select Guest Networks.
Step 3: In the Guest Network Settings window, scroll down to the
Wireless Settings (5GHz a/n) section, and type a new Guest
Wireless Network Name (SSID). This will be your new Wi-Fi
network. For example, you could call it My Video Wi-Fi.
Step 4: Make sure that the Enable Video Mode radio button is
checked.
Step 5: Click Apply.
Step 6: Connect your media-streaming devices, or PCs that you
use to stream video, to this separate Wi-Fi network on your router.
To Next Page
Loading...
