N-150 2-Port Wireless Router WNR500 User Manual
Index-4
v1.0, November 2011
port numbers 3-3
port status 6-6
port triggering
configuring 5-9
example 5-3
portmap table 5-13
power adapter specifications A-3
Power light, troubleshooting and 7-2
Powerline HD products 5-23
PPTP (Point to Point Tunneling Protocol) 1-10
Preamble mode 2-12
primary DNS server 1-8, 1-11
prioritizing traffic 5-16
protocols, compatibility A-3
Push ’N’ Connect 2-13
Q
QoS (Quality of Service) 5-16
R
radio, wireless 1-13, 2-12, 6-4
range, router 5-14
reducing interference 5-14
reference documents B-1
region of operation 2-8
registering product ii
releasing connection status 6-5
remote devices, testing path 7-8
remote management 6-12
renewing connection status 6-5
requirements, speed 5-23
reserved IP adresses 4-4
restarting network 7-1
restoring
configuration 6-8
default factory settings 7-10
restoring firmware 7-3
restricting access by MAC address 2-18
RIP (Router Information Protocol) direction 4-3
route name 4-11
router PIN 2-15, 2-16
router status, viewing 6-2
S
scheduling blocking 3-5
screen display language 1-4
selecting 1-4
secondary DNS server 1-8, 1-11
security
options, compared 2-2
setting up 2-1
security PIN 2-15, 2-16
service name 1-10
service numbers 3-4
services, blocking 3-3
settings, default. See default factory settings
setup information, gathering 2-5
Setup Wizard 1-6
Shared Key authentication 2-5, 2-9
SMTP server 3-8
specifications
technical A-1
speed requirements 5-23
spoofing MAC addresses 1-8, 7-5
SSID 1-12, 2-7, 6-4
SSID broadcast 1-13
standards, compatibility A-3
static IP addresses 1-8
static routes 4-10
statistics, usage 6-6
status, viewing 6-2
streaming video and audio 5-23
subnet mask 4-3, 6-3
system up time 6-6
To Next Page
Loading...
