XE102 Wall-Plugged Ethernet Bridge User Guide
13
v1.0, June 2007
Technical Specifications
The following table shows technical specifications for the XE102 Wall-Plugged Ethernet Bridge.
Table 9. Technical Specifications
Power input 100~240V AC
Dimensions 48mm x 72mm x 103mm (Height x Width x Length)
Weight 0.5 kg
Operating temperature 32° to 104° F (0° to 40°C)
Operating humidity 10-90% maximum relative humidity, noncondensing
Storage humidity 5-95% maximum relative humidity, noncondensing
Powerline standard HomePlug 1.0
HomePlug Frequency 4.3-20.9 Mhz
Data transfer rate
Up to 14 Mbps with real throughput > 4.2 Mbps.
Data Encoding HomePlug 1.0: Othogonal Frequency Division Multiplexing (OFDM),
DQPSK, DBPSK, ROBO
HomePlug Security DES (56 bit)
Network Protocol
Compatibility
IEEE 802.3 (10Base-T); IEEE 802.3u (100Base-Tx); IEEE 802.3x (full-
duplex flow control)
Electromagnetic emissions
FCC Part 15 Class B; CE-Mark, commercial; 3-home FCC
Certificate; MIC
Power and Safety UL Listed (UL 1950) /cUL IEC950; CE LVD
To Next Page
Loading...
