16
Figure 10 – Discovering and configuring network parameters using NETIO Discover (MS Windows)
To change the IP address, click the value in the MAC address column, uncheck Enable DHCP and
specify the IP address, Subnet mask and Default gateway. After applying the settings, NETIO device
will be accessible at the specified address.
Enter the IP address into a web browser or the NETIO Mobile app and log in to the device.
Note: If you can’t use MS Windows app, use NETIO Mobile2 App for Android.
See details in the chapter NETIO Mobile2 for Android
Note: For MAC or Linux users check http://wiki.netio-products.com
To Next Page
Loading...
