Netio PowerBOX 4KE - M2 M API Protocol - Netio Push

53
5.2.7 M2M API Protocol – Netio Push
Figure 25 –Netio Push protocol configuration
Enable Netio Push
Enables Netio Push functions in the system.
Target host HTTP server:
Defines the parameters of the target:
- http / https to specify the protocol
- Target URL
- Port
- Username and Password
Example: https://username:password@test.example.com:80/push
Push Period
Period for the automatic sending of data (Push), in seconds.
Auto Push (delta)
Data will be immediately sent (Push) if a measured value exceeds this limit.
Parameter – at this time, only Current
Value – limit value for the selected parameter
Protocol
Selects the payload format.
- JSON
- XML