Netis DL4305D - Hardware Installation; Connect ADSL Line; Connect Ethernet Cable

1

1. Hardware Installation
Step1:ConnecttheADSLLine.
Methodone:Plugoneendofthetwisted‐pairADSLcableinto
theADSL LINEport onthe rearpanel of the router,and insert
theotherendintothewallsocket.Methodtwo:Youcanusea
separate splitter. The  external splitter has
 three ports:•
Line: Connect to the wall jack• Phone: Connect to the
phone sets• Modem: Connect to the ADSL LINE port of
therouter
Step 2: Connect the Ethernet cable. Attach one end of a network
cabletoyourcomputer'sEthernetportoraregularhub/switchport,
andtheotherendtotheLANportontherouter.
Step3:PoweronthecomputersandLANdevices.
Step4:Attachthepoweradapter.Connectthepoweradaptertothe
powerconnectorontherearofthedeviceandplugintheadapterto