Netis DL4322 User Manual

ADSL2+ Modem Router User Manual
39
There are two modes of WPS settings:
4.3.4 Wireless
Broadcast SSID: When wireless clients survey the local area for wireless networks to associate
with, they will detect the SSID broadcast by the Modem Router. To broadcast the Router’s SSID,
keep the default setting. If you don’t want to broadcast the Router’s SSID, select No.
Use WPS: It allows you to add a new wireless device to an existing network quickly by pushing
WPS button if your wireless adapter also supports Wi-Fi Protected Setup.
WPS Settings: These are the settings of WPS. It shows only when you enabled ‘Use WPS’. In this
condition, you can just leave the Authentication Type as OPEN.
WPS state: Show the configuration states of WPS function.
WPS mode: You can set the WPS either via pressing the WPS button or enter the PIN number
manually.
Ⅰ. PIN code
Please write down the PIN code of your wireless network adapter and enter it into the bar of
enrollee PIN code.Then push the WPS button on your adapter. The WPS light will first get flashing
then solid on if the operation succeeds.
Ⅱ.PBC

Netis DL4322 Specifications

General

Brand	Netis
Model	DL4322
Category	Modem
Language	English