Netis DL4322 User Manual

ADSL2+ Modem Router User Manual
31
Global Address: Specify the lan global ipv6 address, may be assigned by ISP
Enable: Enable or disable the Router Advertisement feature
M Flag: Enable or disable the “Managed address configuration” flag in RA packet
O Flag: Enable or disable the “Other configuration” flag in RA packet
Prefix Mode: Specify the RA feature prefix mode:“Auto”: the RA prefix will use Wan dhcp-pd
prefix.
DHCPv6 Mode：“Manual”: user will specify the prefix Address, Length, Preferred time and Valid
time.
DHCPv6 Mode Specify the dhcpv6 server mode:
“None”: close dhcpv6 server.
“Manual”: dhcpv6 server is opened and user specify the dhcpv6 server address pool and other
parameters.
“Auto”: dhcpv6 server is opened and it use Wan dhcp-pd prefix to generate address pool.
4.3.3 WLAN
To connect to the Wireless AP, we should have the most basic configuration of the router at first.
In this section, you can set the wireless network parameters required to access the AP of your
WLAN interface.

Netis DL4322 Specifications

General

Brand	Netis
Model	DL4322
Category	Modem
Language	English