netis Wireless N VDSL2 Modem Router Quick Installation Guide
3) Select the Connection Mode that given by your ISP. After finish the configuration, click
"Next" to continue.
If "Bridge" is selected, select the Connection Mode defined by your ISP.
If "IPoE" is selected, choose IP Protocol, WAN IP Settings, and DNS Settings that
given by your ISP.
If "PPPoE" or "PPPoA" is selected, choose IP Protocol, input the Username/Password
and DNS Settings that given by your ISP.
If 1483 Routed is selected, enter the IP Address, Netmask, Gateway and DNS Settings
that given by your ISP.
4
To Next Page
Loading...
Need help?
General
