Netis WF-2113 - Restart Computer

WF-2113 User Manual
9


Figure 2-4
2.2 HardwareinstallationofWF2113
2.2.1 Install the Wireless 11N PCI-E adapter into your
computer
¾ Make sure to turn off your computer and unplug the power cord. Remove the back cover
of the computer.
¾ Install the wireless 11N PCI-E Adapter carefully and firmly seat it into an available
PCI-E slot (to avoid damage caused by static electricity, make sure to properly ground
yourself by first touching a metal part of your computer to discharge any static electricity
before working with the wireless 11N PCI-E Adapter).
¾ Secure the wireless 11N PCI-E Adapter back panel shield with a screw.
¾ Replace the computer’s cover.
¾ Place the computer back in its normal position.
¾ Attach the wireless 11N PCI-E Adapter’s antenna to the socket on the back panel shield.