WF-2113 User Manual
21
Figure 3-15
3.6 WiFiprotectsetup
Wi-Fi Protect Setup (WPS) function can let you create a safety network easily. You can
through ‘PIN Input Config (PIN)’ or ’Push Button (PBC)’to encrypt your network. You only
need to push the WPS button in the router which support WPS function and click the
functions in this adapter, then the router will be encrypted to WPA2-AES mode automatically
Note:
¾ The status of WPS in the router must be enabled
¾ If you have configured encryption mode in your router, then when you use this WPS
function, please configure encryption mode to NONE, then it will be encrypted to
WPA2-AES mode automatically. If you don’t want to change your encryption mode, then
when you use this function, the router will be encrypted to the mode that you have
configured.