CONTROL PANEL OPERATION
When the machine is powered on for the first time, the buzzer will have a beep
and then the machine will go into standby status.
① Power Key: Press the key to turn on and turn off the machine.
② Cooling Key: Press this button for the cooling function.
③ Dehumidify Key: Press this key to turn on the dehumidify mode.
④ Fan Key: Press this key to operate the fan mode.
⑤ Low Wind: When cooling/fan mode is on, press this key to adjust to low speed.
⑥ High Wind Key: When cooling/fan mode is on, press this key to adjust to high
speed. (It is inapplicable when in sleep mode)
⑦ Display Window: LED display
⑧ Sleep Mode: With cooling mode on, press this key to turn on or turn off the sleep
function.
⑨ Down Key: With the timer function selected, press this key to shorten the set time.
In cooling mode, press this key to lower the set temperature.
⑩ Up Key: With the timer function selected, press this key to lengthen the set time. In
cooling mode, press this key to raise the set temperature.
⑪ Timer Key: Press this button to allow you to set the timer. Timing values can be set
in 1-24 hours and the timing value is adjusted up or down by one hour.
⑫Water Full Indicator: When this light flash, it means that the machine will stop
working when the water is full and the water needs to be drained away.
To Next Page
Loading...
