Installation:
Warning! Before using this Portable Air Conditioning unit, keep it upright
for at least two hours.
The air conditioner can easily be moved around the room. When moving,
ensure that the unit stays upright and on a flat surface. Do not install and
use the unit in the bathroom or other humid areas.
1. Install the heat pipe assembly (fig. 1)
a）Take out the outer connector assembly and the exhaust pipe assembly
and remove the plastic bags.
b）Insert the heat pipe assembly (the end of the exhaust joint) into the
back-panel vent slot (push to the left) and complete the assembly (as
shown in figure 1).
To Next Page
Loading...
