Netum C990 - Working Via USB Dongle; Working Via Bluetooth

(3)

WorkingViaUSBDongle(WirelessMode)

GetStarted:PlugtheUSBdongleonyourcomputer.IfyouuseUSkeyboard, 
it'splugandplay.Ifyouuseothertypeofkeyboard,pleasereferto 
"keyboardlanguage"toconigurethekeyboardlanguagebeforeuseit.


%#IFSN0$1 
*WirelessTransmit 

WorkingViaBluetooth
GetStarted:Scan“WorkingviaBluetooth”,pairingthebluetooth.USKeyboard 
issetbydefaultifyouuseothertypesofkeyboardpleaseconigurekeyboard 
languagebeforeyouuseit. 




ImportantNotes:
%#IFSNO$4 
WorkingviaBluetooth 
• MakesurethedeviceisinrangewithBluetoothturnedon. 
• Pressingthescanbuttonwillinitiatetheattemptstoconnect. 
• Ifaconnectionismade,thebluelightwillstopblinkingandturnsolid. 
• Ifaconnectionisnotmadeafterseveralattempts,thescannerwill 
emitalongbeep(andthebluelightwillturnoff). 
• Bluetoothworkingchannelisnotsetbydefault.Ifyouwanttoworkvia 
bluetooth,youhavetoscancommandbarcodeof“Workingviabluetooth” 
beforepairing.IfyouwanttoshiftfrombluetoothworkingchanneltoRF 
Wirelesschannel,youhavetoscan“RFWirelessTransmit”thenplugtheUSB 
receiverintoyourdevice. 