To Next PageTo Next Page
Need help?Do you have a question about the Netum NT-1698W and is the answer not in the manual?
General| Type | Wireless Barcode Scanner |
|---|---|
| Scanning Technology | Laser |
| Compatibility | Windows, Mac OS, Linux |
| Light Source | 650nm Laser Diode |
| Operating Frequency | 2.4GHz |
| Connectivity | Wireless |
| Operating Distance | Up to 100 meters (open space) |
Guides on connecting the scanner via USB cable or receiver for operation.
Instructions on how to scan a barcode correctly using the scanner.
Explains the meaning of different buzzer sounds and LED lights for scan status.
Overview of how barcode scanners are programmed and how to change settings.
Details about the USB-KBW communication mode and its Plug and Play functionality.
Instructions for setting scanning modes like Trigger Mode and Continuous Mode.
How to configure terminating characters like CR or CRLF for scanned data.
Setting the scanner's idle time to manage power consumption and sleep mode.
How to revert scanner configurations to their original factory default settings.
Procedure to enable wireless scanning when data is not being outputted.
Method to scan a command barcode to retrieve the scanner's firmware version.
Settings for enabling/disabling and multi-verification of Code 11 barcodes.
Settings for enabling/disabling Code 39, check digits, and multi-verification.
Settings for enabling/disabling Code 32 barcodes.
Settings for enabling/disabling and multi-verification of Code 93 barcodes.
Settings for enabling/disabling and multi-verification of Code 128 barcodes.
Settings for enabling/disabling Codabar and its start/stop characters.
Settings for enabling/disabling and multi-verification of Interleaved 2 of 5 barcodes.
Settings for enabling/disabling and multi-verification of Industrial 2 of 5 barcodes.
Settings for enabling/disabling China Post barcodes.
Settings for enabling/disabling and multi-verification of MSI barcodes.
Settings for enabling/disabling EAN-8 and its check digit transmission.
Settings for enabling/disabling EAN-13, check digits, and ISBN/ISSN conversion.
Settings for enabling/disabling UPC-A and its check digit transmission.
Settings for enabling/disabling UPC-E and its check digit transmission.
Settings for converting UPC-E barcodes to UPC-A format.
Configuration for UPC/EAN 2-digit, 5-digit, and multi-verification add-on codes.
Steps to clear existing prefixes and add new ones using command barcodes.
Steps to clear existing suffixes and add new ones using command barcodes.
Procedure to hide a specified number of characters from the beginning of scanned data using command barcodes.
Method to hide a specified number of characters from the end of scanned data using command barcodes.
How to hide a specific character position from the front of scanned barcode data.
