Need help?Do you have a question about the Netum W6 and is the answer not in the manual?
Explains scanner data transmission via USB Dongle or USB cable.
Steps for transmitting data using the 2.4G USB Dongle.
Steps for transmitting data using the USB cable.
Scanner simulates USB keyboard input, plug-and-play without drivers.
Scanner emulates a serial port for data reception, requires a driver.
Instructions and options for configuring scanner's keyboard language input.
Standard scanner operation mode for regular use.
Stores scanned data in buffer memory when out of signal range.
Commands to clear stored data and output stored or total entries.
Configures the time period before the scanner enters sleep mode.
Enables or disables case conversion for scanned data.
Adjusts the scanner's beep volume to high, low, or mute.
Enables or disables function character transmission via keypad.
Addresses common reasons why barcodes may not be read correctly.
Guidance on changing terminators, prefixes/suffixes, and foreign languages.
Troubleshooting for reading specific barcode types like Italy Pharmacy or GS1.
Explains scanner data transmission via USB Dongle or USB cable.
Steps for transmitting data using the 2.4G USB Dongle.
Steps for transmitting data using the USB cable.
Scanner simulates USB keyboard input, plug-and-play without drivers.
Scanner emulates a serial port for data reception, requires a driver.
Instructions and options for configuring scanner's keyboard language input.
Standard scanner operation mode for regular use.
Stores scanned data in buffer memory when out of signal range.
Commands to clear stored data and output stored or total entries.
Configures the time period before the scanner enters sleep mode.
Enables or disables case conversion for scanned data.
Adjusts the scanner's beep volume to high, low, or mute.
Enables or disables function character transmission via keypad.
Addresses common reasons why barcodes may not be read correctly.
Guidance on changing terminators, prefixes/suffixes, and foreign languages.
Troubleshooting for reading specific barcode types like Italy Pharmacy or GS1.
This document describes the NETUM 2.4G Wireless CCD/2D SCANNER, a device designed for barcode scanning with various connectivity and configuration options.
The NETUM scanner is a versatile device capable of reading both CCD and 2D barcodes wirelessly via a 2.4G USB dongle or wired via a USB cable. It is factory-programmed with common terminal and communication settings, but offers extensive customization through barcode programming. The scanner supports different working modes, including a normal mode for real-time data transmission and a store mode for offline data collection.
1. Connection Ways: * 2.4G USB Dongle: 1. Plug the USB dongle into your device. 2. Power on the scanner. 3. Ensure the correct keyboard language is set (US keyboard is default). * Wireless transmit is enabled by default (scan "%#IFSN0$1" if needed). * USB Cable: 1. Plug one end of the USB cable into the scanner's bottom and the other into your device. 2. Ensure the correct keyboard language is set (US keyboard is default). * USB HID-KBW (Default): Simulates USB keyboard input, plug-and-play, no driver required (scan "$USB#KEY" if needed). * USB COM Port Emulation: Allows data reception as a serial port. Requires a driver (scan "$USB#COM" to enable).
2. Keyboard Language Configuration:
* The scanner's output can be configured to match various keyboard layouts.
* To change, scan the corresponding barcode:
* $LAN#EN (America EN keyboard - default)
* $LAN#FR (French keyboard)
* $LAN#GE (Germany keyboard)
* $LAN#IT (Italy keyboard)
* $LAN#PT (Portugal keyboard)
* $LAN#ES (Spain keyboard)
* $LAN#UK (UK keyboard)
* $LAN#HU (Hungary keyboard)
* $LAN#TK (Turkey Q keyboard)
* $LAN#TF (Turkey F keyboard)
3. Working Modes: * Normal Mode (Default): Data is transmitted in real-time to the connected device. (Scan "*Normal Mode" to enable). * Store Mode: For use outside Bluetooth signal range. Scanned data is stored in the scanner's buffer memory and can be uploaded manually later. (Scan "Store Mode" to enable). * Output Stored Data: Uploads all data saved in store mode. * Clear Memory: Deletes all stored data. * Output Total Entry: Displays the total number of entries stored. * Note: In Store Mode, the scanner beeps twice when memory is full.
4. Idle Time Settings:
* Configures the time before the scanner enters sleep mode.
* $POWER#OFF (Power Off)
* $RF#ST00 (0 Min)
* $RF#ST20 (10 Mins)
* $RF#ST60 (30 Mins)
5. Convert Case:
* Controls the case of scanned data.
* * Disable Convert Case (Default)
* Up Low Case Swap (A<->a)
* All Upper Case (a->A)
* All Lower Case (A->a)
6. Beep Volume:
* Adjusts the audible feedback from the scanner.
* $BUZZ#1 (*High Volume - default)
* $BUZZ#3 (Low Volume)
* $BUZZ#0 (Mute)
7. Function Key Mapping:
* When enabled, function characters are sent over the keypad.
* $KEY#MO (*Disable Function Key Mapping - default)
* $KEY#M1 (Enable Function Key Mapping)
For more detailed configurations and troubleshooting, users are directed to download the comprehensive manual from the official NETUM website: https://www.netum.net/.
Contact Information:
To Next Page
General
