9
5 SETTING UP THE FIREPLACE
Place the fireplace in its final position before continuing to
set up the fireplace.
Level the fireplace using the adjustable legs.
Once you have levelled the fireplace, it is strongly
recommended that you attach it to the wall using the wall
brackets for added stability and safety.
5.1 Flat Bottom Plate
The fireplace comes with a flat bottom plate. The bottom
plate can be removed by removing 2 M5 x 10 bolts on each
side of the plate. Removing the bottom plate will allow
easier access to the junction box at the front of the fireplace
during installation. After the fireplace is wired reinstall the
bottom plate.
If the optional design bottom plates will be used the flat
bottom plate must be removed and replaced with the
design bottom plates.
5.2 (Optional) Placing Design Bottom Plates
Please note: If a flat bottom plate was chosen, this step can
be skipped.
The design bottom plates are made of fragile
material. Therefore, proceed with extreme
caution when installing the bottom plates.
To Next Page
Loading...
Need help?
General
