Neuton CE5.2 User Manual

NEUTON CE5.2 Battery-Powered Mower - Safety & Operating Instructions 43
Charger Troubleshooting Table
PROBLEM CORRECTIVE ACTION
The Battery LED
does not turn RED
when the Charger
is connected
⇒ Unplug the Battery Charger from your standard 110-Volt wall outlet and from the
Charger Receptacle on the Battery. Inspect the Battery Charger for any visible signs
of damage to the body and the cord. If you observe damage to the Battery
Charger, please discontinue use.
Use of a damaged Battery Charger may cause a short circuit and the potential for a
fire.
⇒ Inspect the Charger Receptacle on the Battery for any signs of visible damage or
debris. If there is debris present, please use caution to remove the debris.
Do not remove the debris with any metallic objects, damp or flammable items, or
items that may become lodged in the Charger Receptacle as this may cause a fire, or
explosion of the Battery. If you observe damage to the Charger Receptacle, please
discontinue use.
Use a vacuum equipped with a non-metallic nozzle to remove debris from the
Charger Receptacle on the Battery.
NOTE: You can damage the Charger Receptacle by excessive force. It should not take a
great amount of force to insert the round Charger Connector. Please do not force
the round Charger Connector into the Charging Receptacle on the Battery.
⇒ Verify your Standard 110-Volt wall outlet is functioning correctly by plugging a
lamp or other electrical device into the same socket on the wall outlet you are
intending to use.
TIP

Neuton CE5.2 Specifications

General

Brand	Neuton
Model	CE5.2
Category	Lawn Mower
Language	English