Why won't the CHRONOMETER display on the Nevco Controller scoreboard when I press CHRONOMETER?
If the CHRONOMETER won't display on the scoreboard, it's likely because the CHRONOMETER key is not enabled. Use SET CHRONOMETER to enable it.
What to do if the Nevco Controller horn doesn't sound when the time expires?
If the horn doesn't sound when the time expires, it might be because the auto horn is turned off. Enable the auto horn by using the command SET HORN YES.
Why can't I save a bookmark on my Nevco Controller?
You likely cannot save a bookmark because the time is running. Turn the time off before saving a bookmark.
What to do if the Nevco 2550 timer counts in the wrong direction?
If the timer is counting in the wrong direction, it means the timer direction is set incorrectly. Use SET OPTIONS to change the timer direction.
What to do if the tenth second does not show on the Nevco 2550 scoreboard?
The tenth second might not show on the scoreboard for several reasons: * The main clock is counting up. * The tenth second display has been disabled; the control must be turned off and then restarted. * The time is above one minute, so be patient.
What to do if I cannot subtract from the score on the Nevco 2550?
If you cannot subtract from the score, it is because the score keys only add to the score. Use SET, then the score key, and enter the correct score directly.
What to do if the time is counting, but the period is wrong on the Nevco 2550 Controller?
If the time is counting but the period displayed is incorrect, it means the wrong period was entered during setting the time. Press SET TIME NO and enter the correct period number.
What to do if I cannot clear the Time Out Timer from the Nevco 2550 Controller scoreboard without sounding the horn?
If clearing the Time Out Timer forces it to drop to the warning time, which sounds the warning horn, this is because of how the timer is set up. Before the game, set up another Time Out Timer that doesn't have a warning time and doesn't display on the scoreboard. Interrupt the unneeded Timer with this one and then clear it.
Resuming operation after a power failure.
Starting a new game using saved configuration data.
Inputting the 3-character code to set up the control.
Example of setting the Chronometer to a specific time.
Procedures for reviewing, adding, or editing segment timer entries.
Steps for removing segments from the segment timer list.
Steps to modify the duration of an existing segment timer entry.
Configuring the segment timer to act like an interval horn.
Configuring the segment timer for practice drills with multiple segments.
Configuring the segment timer for a typical soccer application scenario.
Configuring the segment timer for a college volleyball pre-match protocol.
General| Brand | Nevco |
|---|---|
| Model | 2550 |
| Category | Controller |
| Language | English |
To Next Page
