Nevco MPCW-6 - User Manual

Please Read This First!
Quick Start
Your system Data has been Preinstalled.
To light all scoreboards in your system turn on
the control. Press the “YES” key when
prompted, “Do you want to start where last
turned off?”
To change your system data refer to the
System Key Management Instructions
attached.
Nevco Scoreboard Company
1-800-851-4040

Nevco MPCW-6 Specifications

General

Brand	Nevco
Model	MPCW-6
Category	Control Unit
Language	English

Summary

Quick Start Guide

MPCW-6 System Overview

Group Management Introduction

Explains the principles of Nevco wireless scoreboard system management and group creation.

MPCW-6 Setup Procedure

Naming the Receiver

Process for assigning a unique name to each system receiver using the control keypad.

Create a Group

How to define and name groups for organizing scoreboards and equipment.

Add Receivers to A Group

Steps to assign receivers to their respective groups for operation.

Confirming the Set UP

Verification steps to ensure the system setup is correct before saving.

Saving Changes to the System

Procedure for saving all system configuration changes to the system key.

System Configuration Changes

Adding or Deleting Receivers

Guide on how to add new or remove existing receivers from the system.

Adding or Deleting Groups

Instructions for creating or removing equipment groups within the system.

Changing Receiver or Group Names

How to rename receivers or groups within the system configuration.

Removing Receivers from Groups

Process for unassigning a receiver from a specific group without deleting it.

Naming or Removing Owner Name

Steps for managing the owner's name associated with the system.

Troubleshooting

Control Unable to Receive Data

Addresses issues where the control cannot receive data from receivers.

Lost or Corrupted System Key

Solution for restoring data to a system key or replacing it.

Adding a New Receiver