To Next PageTo Next Page
Need help?Do you have a question about the New Holland C332 Tier 3 and is the answer not in the manual?
General| Engine Power | 74 hp |
|---|---|
| Operating Weight | 8, 317 lbs |
| Net Horsepower | 74 hp |
| Rated Operating Capacity | 2200 lbs |
| Engine | Diesel |
| Tipping Load | 4, 400 lbs |
Important notice regarding equipment servicing and safety disclaimers.
Essential safety precautions for personal protection during operation.
General safety rules and precautions for operating the machine.
Safety rules unique to the operation of this specific machine model.
Guidelines for environmentally responsible handling and disposal of materials.
Specifications for minimum tightening torques for metric hardware assembly.
Standard torque values for various hydraulic connections.
Torque specifications for BSPP thread ports and stud ends.
Procedures for shop and assembly tasks, including seals and spare parts.
Safety procedures for protecting electronic systems during charging and welding.
Procedure for locking the loader arm and tilting the cab for radial lift machines.
Procedure for locking the loader arm and tilting the cab for vertical lift machines.
Procedure for controlling loader arm movement when the engine is not powered.
Guide to finding and viewing vehicle configurations using the eTIM system.
Information on accessing video links within the service manual.
Explanation of hydraulic contamination sources, problems, and types.
Specifications for fluid capacities of various machine systems.
Recommended engine oil types based on operating temperature ranges.
Recommended hydraulic oil types and viscosity for all models.
Information on identifying machine model, PIN, and serial numbers.
