EasyManua.ls Logo

New Holland E26C - User Manual

New Holland E26C
282 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
E26C
Mini Excavator
Part number 90436680
1
st
edition English
January 2021
ORIGINAL INSTRUCTIONS

Table of Contents

Other manuals for New Holland E26C

Questions and Answers

  • T
    Tracy MarquezAug 20, 2025
    What to do if the engine does not start in New Holland E26C Excavators?
    • K
      Kimberly AdkinsAug 20, 2025
      If your New Holland Excavator's engine isn't starting, possible causes include a low fuel level, so add fuel; air leaking in the fuel system; a defect or damage in the fuel injection pump or in the nozzle; incorrect valve clearance; or incorrect engine compression pressure.
  • A
    ashleybarrettAug 22, 2025
    Why does the engine oil pressure light appear when raising the engine speed on New Holland E26C?
    • J
      John KellyAug 22, 2025
      The engine oil pressure light might appear due to several reasons: the oil level may be low, so add oil to the specified level; the oil filter may be clogged, in which case replace the oil filter cartridge; there may be oil leaks, so check the correct tightening torque of pipes and joints; or there could be a defect in the cluster.
  • J
    jorgewilsonAug 25, 2025
    What to do if steam is emitted from the radiator of New Holland E26C?
    • J
      Justin DiazAug 25, 2025
      If steam is coming from the radiator and the coolant level warning light is on, it could be due to several issues: low coolant level, so supply the coolant and check for leakage; incorrect fan belt tension, so adjust the fan belt tension; a dirty cooling system, so wash out the inside of the cooling system; dirty or damaged radiator fin; a defect on the thermostat; or incorrect tightening torque of the radiator cap, so tighten the radiator cap firmly or replace the packing of it; or a defect in cluster.
  • M
    munozpatrickAug 27, 2025
    Why is exhaust gas occasionally turning black in New Holland Excavators?
    • R
      rebeccamclaughlinAug 27, 2025
      If the exhaust gas occasionally turns black, the air cleaner element might be dirty or damaged, so clean or replace the air cleaner element; there could be a defect in the nozzle; or wrong engine compression pressure.
  • C
    Chris HillAug 28, 2025
    Why is the hydraulic oil temperature rising excessively in New Holland E26C?
    • K
      Kimberly McphersonAug 28, 2025
      Excessive hydraulic oil temperature can be caused by a dirty oil cooler, so clean the oil cooler; incorrect fan belt tension, so adjust the fan belt tension; or a low oil level, so add oil to the specified level.
  • S
    scottdonaldAug 29, 2025
    Why is exhaust gas white or blue in New Holland Excavators?
    • M
      michaelhowardAug 30, 2025
      If the exhaust gas is white or blue, it could be due to the wrong oil quantity, so adjust to the specified oil quantity, or the wrong fuel, so replace with the specified fuel.
  • W
    westjohnAug 31, 2025
    What to do if starter motor turns the engine sluggishly in New Holland E26C Excavators?
    • C
      Christopher WilsonAug 31, 2025
      If the starter motor turns the engine sluggishly, the battery might not be charged, so charge the battery, or the starter motor may be damaged.
  • R
    Richard ClarkeSep 2, 2025
    What to do if the starter motor does not turn in New Holland E26C?
    • J
      Jennifer WhiteSep 2, 2025
      If the starter motor does not turn when the starter switch is turned to START, it could be due to damaged wiring, a battery that is not charged, so charge the battery, a damaged starter motor, or a damaged safety relay.
  • J
    Jeffrey HerreraSep 4, 2025
    What to do if unusual noise is emitted from the pump in New Holland E26C?
    • C
      Christopher MillerSep 4, 2025
      If there's an unusual noise coming from the pump, the hydraulic tank strainer might be clogged or dirty, so clean the hydraulic tank strainer.
  • G
    Gregory ReyesSep 6, 2025
    How to fix track slip out of place on New Holland E26C Excavators?
    • D
      Denise GarciaSep 6, 2025
      If the track slips out of place, it might be due to incorrect tension of track, so adjust the tension of the track.

Summary

2 SAFETY INFORMATION

Signal word definitions

Explains DANGER, WARNING, CAUTION, and NOTICE to convey hazard levels.

Safety rules - Utility precautions

Emphasizes safety precautions when working near buried utility lines.

Safety rules

General safety guidelines for machine operation, maintenance, and handling.

3 CONTROLS AND INSTRUMENTS

4 OPERATING INSTRUCTIONS

Starting the unit

Procedures for starting the machine, including anti-theft protection.

Starting the engine

Step-by-step procedure for safely starting the machine's engine.

Operating the machine on sloping ground

Critical safety and operational guidance for working on inclined surfaces.

Stopping the engine

Procedures for safely shutting down the machine's engine.

Machine travel

Instructions and precautions for safely moving the machine.

Parking the machine

Step-by-step guide for safely parking the machine.

5 TRANSPORT OPERATIONS

Loading the machine onto a transport trailer

Procedure for safely loading the machine onto a transport trailer.

Tie downs for shipping

Instructions for securing the machine with tie-downs for safe transport.

6 MAINTENANCE

Basic instructions

General safety and procedural guidelines for performing maintenance tasks.

Maintenance chart

Schedule of maintenance actions based on operating hours and type of service.

Engine oil and filter

Procedure for replacing engine oil and the oil filter.

7 TROUBLESHOOTING

New Holland E26C Specifications

General IconGeneral
BrandNew Holland
ModelE26C
CategoryExcavators
LanguageEnglish

Related product manuals