To Next Page
P
Phillip PorterSep 8, 2025
What causes the bucket to rise slowly on New Holland E26C?
- GGeorge FergusonSep 8, 2025
If the bucket rises slowly or not at all, it could be due to a low oil level, so add oil to the specified level.
What causes the bucket to rise slowly on New Holland E26C?
If the bucket rises slowly or not at all, it could be due to a low oil level, so add oil to the specified level.
What causes slow speed of travel on New Holland Excavators?
If you experience slow speed of travel, swing, boom, arm, and bucket, it might be due to a low oil level, so add oil to the specified level.
What to do if the pinion of the starter motor keeps going in and out on New Holland E26C Excavators?
If the pinion of the starter motor keeps going in and out, the battery might not be charged, so charge the battery, or the safety relay may be damaged.
Why is unusual combustion noise or mechanical noise appearing in New Holland E26C?
If you hear unusual combustion or mechanical noise, it could be due to the wrong fuel, so check with specified fuel; over-heating, so check over-heating; a defect in the muffler; or incorrect valve clearance.
General| Brand | New Holland |
|---|---|
| Model | E26C |
| Category | Excavators |
| Language | English |
Explains DANGER, WARNING, CAUTION, and NOTICE to convey hazard levels.
Emphasizes safety precautions when working near buried utility lines.
General safety guidelines for machine operation, maintenance, and handling.
Procedures for starting the machine, including anti-theft protection.
Step-by-step procedure for safely starting the machine's engine.
Critical safety and operational guidance for working on inclined surfaces.
Procedures for safely shutting down the machine's engine.
Instructions and precautions for safely moving the machine.
Step-by-step guide for safely parking the machine.
Procedure for safely loading the machine onto a transport trailer.
Instructions for securing the machine with tie-downs for safe transport.
General safety and procedural guidelines for performing maintenance tasks.
Schedule of maintenance actions based on operating hours and type of service.
Procedure for replacing engine oil and the oil filter.
