To Next PageTo Next Page
Need help?Do you have a question about the New Holland Workmaster 25S Tier 4B and is the answer not in the manual?
General| Drive | 4WD |
|---|---|
| Transmission | 6x2 gear or Hydrostatic (HST) |
| Weight | 1, 433 lbs (650 kg) - Gear; 1, 543 lbs (700 kg) - HST |
| PTO Speed | 540 RPM |
| Hydraulic System | Open Center |
| Engine Type | Diesel |
| Fuel Tank Capacity | 6.6 gal (25.0 L) |
| Tire Size (Front) | 23x8.5-12 |
| Engine Power | 24.7 hp (18.4 kW) |
Important notices and disclaimers regarding equipment servicing procedures and responsibilities.
Guidelines and warnings for personal safety during operation and maintenance of the machine.
Environmental protection guidelines and proper disposal of fluids and materials.
Specifications for torque values and lubrication of hydraulic connections.
Procedures for shimming, rotating shaft seals, O-rings, and sealing compounds.
Emphasis on using genuine parts for quality, duration, and safety assurance.
Practices to avoid damage to electronic systems during charging and welding operations.
Importance and benefits of using specialized tools for efficient and reliable repair operations.
Specifications for the engine, its capacities, and cooling system.
Details on fuel system, HST transmission, service, and parking brakes.
Specifications for steering, PTO systems, and hydraulic lift system.
Speed ranges, tire types, and torque values for wheels and ROPS.
Guidelines and conditions for using Biodiesel Fuel blends in the machine.
Recommended NEW HOLLAND engine oils with specifications.
Recommended NEW HOLLAND transmission and hydraulic oils.
Recommended NEW HOLLAND front axle/gear oil and multi-purpose grease.
Recommended CNH heavy-duty coolant/anti-freeze.
Wheel tread settings for front tires (Turf and Industrial).
Wheel tread settings for rear tires (Turf and Industrial).
Weight of the machine without tires.
Location of chassis and engine Product Identification Number (PIN) plates.
Location of transmission and emissions plates.
Images showing the left and right sides of the machine.
Images showing the rear and front views of the machine.
Covers general engine components including crankcase, fuel, air, and cooling systems.
Specific details and procedures related to the engine and crankcase.
Step-by-step instructions for engine removal, installation, and preliminary steps.
