EasyManua.ls Logo

NewAir CLEARICE40 - User Manual

NewAir CLEARICE40
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CLEARICE40
Countertop Clear Ice Maker
OWNERS MANUAL
Read and save these instructions.
Manual v1.1

Questions and Answers

  • K
    Katelyn ClarkJul 27, 2025
    How to fix the 'ADD WATER' indicator on my NewAir CLEARICE40?
    • M
      moorekevinJul 27, 2025
      If the NewAir Ice Maker displays the “ADD WATER” indicator, it means that the unit lacks water. To resolve this, stop the ice maker, fill the top water reservoir up to the “FULL” mark, and then press the “ON/OFF” button again to restart it.
  • A
    Andrew RojasAug 1, 2025
    Why are the ice cubes from my NewAir CLEARICE40 so thin?
    • B
      Brenda McclureAug 1, 2025
      If the ice cubes produced by your NewAir Ice Maker are too weak and thin, it may be because the surrounding temperature is too hot. To address this, first turn off the unit. Then, press the “ON/OFF” button again for more than five seconds to turn the unit back on. This action will lengthen each ice-making cycle time.
  • L
    Laura HallAug 7, 2025
    How to unclog the water separator pipe on a NewAir Ice Maker?
    • M
      Miranda CarsonAug 7, 2025
      If there is no water flow out from the water separator pipe in your NewAir Ice Maker, it is likely that the hole on the wall of the water separator is blocked. To fix this, use a slim wire to prick each hole until the water can flow out easily.
  • J
    juliachavezAug 11, 2025
    Why is my NewAir Ice Maker not making ice even though the cycle seems normal?
    • S
      Samantha McgeeAug 11, 2025
      If your NewAir Ice Maker completes the ice-making cycle normally but produces no ice, it might be due to a high surrounding temperature or high water temperature in the inner tank. Ensure that you run the ice maker below 90°F and pour cold water into the tank. If the problem persists, verify by a qualified technician.
  • J
    Johnny Mueller IVAug 16, 2025
    What to do if the 'FULL ICE' indicator is on in my NewAir Ice Maker?
    • C
      Casey PruittAug 16, 2025
      If the NewAir Ice Maker shows the “FULL ICE” indicator, it signifies that there is too much ice in the ice basket. Simply remove some ice from the ice basket to resolve this.
  • V
    Victoria Melendez DVMAug 21, 2025
    Why does the 'ADD WATER' light stay on in my NewAir Ice Maker even when the reservoir is full?
    • J
      James GriffinAug 21, 2025
      If the big reservoir of your NewAir Ice Maker is full of water, but the “ADD WATER” indicator remains on, it could be due to two reasons. First, if you are using distillation water, remove ice from the ice bucket. Second, the water filler at the bottom of the water reservoir might be blocked, preventing water from entering the lower water tank. In this case, clean the water filter.

Summary

Important Safety Instructions

Understanding Safety Alert Symbols

Explains the meaning of safety alert symbols, DANGER, WARNING, and CAUTION.

Preparing Your Ice Maker for Use

General Safety Precautions

Lists essential safety precautions when using the ice maker, including cord safety and placement.

Refrigerant and Installation Safety

Flammable Refrigerant Warnings

Hazards of flammable refrigerant, including fire, explosion, and handling precautions.

Operating Procedures and Maintenance

Connecting Your Ice Maker

Instructions and safety warnings for connecting the ice maker to a power source.

Cleaning and Maintaining Your Ice Maker

Using Your Ice Maker

Adding Water and Starting Operation

Instructions for filling the water reservoir and initiating the ice-making cycle.

Troubleshooting Common Issues

NewAir CLEARICE40 Specifications

General IconGeneral
TypePortable Ice Maker
Ice Cube SizeSmall, Medium, Large
Water Reservoir Capacity2.5 liters
Power Consumption120 watts
Voltage115V
Ice ShapeBullet
Reservoir Capacity2.5 liters
Ice Production Capacity40 lbs per day
MaterialStainless Steel

Related product manuals