Why is my NewAir Air Conditioner not cooling?
If your NewAir Air Conditioner isn't cooling, make sure the air vents aren't blocked and the dust filter is clean. Other heat sources may be affecting the unit's performance. Also, ensure the temperature is set lower than the room temperature and the fan speed is set to high.
What to do if my NewAir NAC14KWH02 does not work?
If your NewAir Air Conditioner isn't working, check that it's plugged into a working outlet and turned on. Make sure the water tank isn't full, the timer isn't running, and the power cord safety switch hasn't tripped. Empty the tank, disable the timer, and reset the safety switch if necessary.
Allows setting unit operation time from 0 to 24 hours, with auto turn-off or turn-on functionality.
Controls fan speed for 'cool' and 'fan' modes; 'dry' mode limits to low speed.
Shows ambient temperature, chosen temperature setting, or timer hours.
Adjusts temperature and time settings; simultaneously changes display between Fahrenheit and Celsius.
Cycles through 'cool', 'dry', and 'fan' modes for different operational functions.
Turns the air conditioner unit on and off.
Allows full control of unit functions, including a 'swing' feature for oscillating airflow.
Automatically shuts off unit if internal pipes get too cold to prevent frost buildup.
Alerts when the internal water tank is full, requiring drainage.
Delays compressor restart for 3 minutes after shutdown to maintain efficiency.
Select a flat, dry place with at least 20 inches of space around the unit for efficiency and safety.
Detailed steps for connecting the exhaust pipe to the unit and window plate.
Adjustable window plate fits standard vertical/horizontal openings to seal the exhaust.
General cleaning instructions, including using a damp cloth and avoiding chemical solvents.
Procedure for cleaning the dust filter, recommending soaking or vacuuming for optimal air circulation.
Allows setting unit operation time from 0 to 24 hours, with auto turn-off or turn-on functionality.
Controls fan speed for 'cool' and 'fan' modes; 'dry' mode limits to low speed.
Shows ambient temperature, chosen temperature setting, or timer hours.
Adjusts temperature and time settings; simultaneously changes display between Fahrenheit and Celsius.
Cycles through 'cool', 'dry', and 'fan' modes for different operational functions.
Turns the air conditioner unit on and off.
Allows full control of unit functions, including a 'swing' feature for oscillating airflow.
Automatically shuts off unit if internal pipes get too cold to prevent frost buildup.
Alerts when the internal water tank is full, requiring drainage.
Delays compressor restart for 3 minutes after shutdown to maintain efficiency.
Select a flat, dry place with at least 20 inches of space around the unit for efficiency and safety.
Detailed steps for connecting the exhaust pipe to the unit and window plate.
Adjustable window plate fits standard vertical/horizontal openings to seal the exhaust.
General cleaning instructions, including using a damp cloth and avoiding chemical solvents.
Procedure for cleaning the dust filter, recommending soaking or vacuuming for optimal air circulation.
General| Type | portable |
|---|---|
| Operating Area Size | 500 square feet |
| Cooling Settings | 3 |
| Seasonally Adjusted Cooling Capacity | 10000 british thermal units |
| Heater | no |
| Fan Speeds | 3 |
| Fan Airflow Rate | 250 cubic feet per minute |
| Hose | single |
| Remote Control | yes |
| Timer | yes |
| Sleeping Mode | yes |
| Energy Efficiency | 7.8 |
To Next Page