EasyManua.ls Logo

Newcastle Systems PowerSwap Nucleus - Warnings;Precautions

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SUPPORT +1 (781) 935.3450 EXT. 3 8
Warnings/Precautions
Warnings/Precautions
WARNING!
Indicates possibility of physical harm to
the user in case of non-compliance
CAUTION!
Indicates possibility of damage to the
equipment in case of non-compliance
FOLLOW OPERATING
INSTRUCTIONS
WARNINGS!
1. DO NOT OPEN TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK. THERE
ARE NO SERVICEABLE PARTS INSIDE -
REFER TO QUALIFIED SERVICE PER-
SONNEL.
2. It is recommended that you return the Nucleus
battery interface to a qualified dealer for any
service or repair. Incorrect assembly may result in
electric shock or fire.
3. To reduce risk of electric shock, unplug the DC
input (battery) before attempting any mainte-
nance or cleaning.
4. To reduce risk of damage to electric plug and
cord, pull by plug rather than cord when discon-
necting anything from the unit.
5. An extension cord should not be used unless
absolutely necessary. If an extension cord is used,
make sure that it has a 3-prong, male plug (NE-
MA1-15P) and 3-prong female receptacle (NEMA1-
15R). The size of the current carrying conductors
should be such that they are able to carry at least
5.0A for the length of the extension.
6. Place the unit in an area that will allow air to
flow freely around the unit. DO NOT block or
obstruct vent openings or install the unit in an
enclosed compartment.
7. Keep the unit away from moisture and water.
8. Never operate two or more units in parallel.
9. WARNING: To avoid risk of electric shock, this
equipment must only be connected to a supply
mains with protective ground.
10. WARNING: No modification of this equipment
is allowed.
EU Waste Electrical and Electronic Equipment (WEEE) Directive
Figure 1: WEEE symbol – crossed out wheeled bin

Related product manuals