Why Newland MT90 Orca Handhelds system halted?
The system may halt due to bugs in downloaded apps, so ensure that only reliable apps are used. Alternatively, a sudden or unexpected power loss could be the cause. In this case, remove and then reinstall the battery to reset the terminal.
What to do if Newland Handhelds won't switch on?
First, check the battery level and recharge it if depleted. If that doesn't work, connect the terminal to a power outlet using the included AC adapter and try switching it on. If it works while connected, continue charging the terminal. If the problem persists after charging, replace the battery with a new one.
What to do if Newland Handhelds has no display?
First, make sure the terminal is switched on. If it's in sleep mode, press the Power key to wake it up. Check the battery level and recharge if needed. Also, ensure the battery is properly installed. If none of these steps work, replace the battery.
How to fix USB communication failure in Newland MT90 Orca Handhelds?
First, ensure that the USB cable connections are secure. Next, check the Micro USB port for any contaminants. If the problem persists, consider contacting the after-sales service center.
To Next Page
General
