Instructions
Newlec Helpline: 0800 783 6909
User Timer
Provides greatest flexibility to the user. Four time slots are available throughout the day and these
can be customised for each day of the week. See ‘Setting a Timer’ on page 16 for instructions
on adjusting these from the factory default time periods & temperatures.
The heater can also maintain a constant room temperature using the following modes:
Manual Mode - Heats the room to a comfortable temperature of 21
o
C.
Frost Protect - Maintains a room temperature of 7
o
C. This mode should be used to provide
protection against frost as indicated by the Frost icon.
Standby - Select Standby to switch o the heating element. Heat will not be provided.
To activate standby:
• Press Menu button
• Press Up highlight the hand icon .
• Press Enter
• Toggle to O
NOTE:
In all modes Down and Up can be used to adjust the required room temperature. In
timer mode, this change is temporary and the heater will set the room temperature
based on the saved heating profiles.
NOTE:
It is recommended that the timer mode is used as doing so can reduce the
running cost. Operating the appliance in the permanent heating modes may result
in increased running costs.
Mode of Operation
15
To Next Page
Loading...