Instructions
Newlec Helpline: 0800 783 6909
Once P1-P4 heating programmes have been set, COPY will flash on the screen. To copy
newly programmed P1-P4 heating programmes to other days press the Enter button.
COPY will be displayed on screen and the next day in sequence will flash at the top of the
screen, To copy to the next day in the sequence, press Up button, to deselect the next day
in sequence press Enter button.
The days of the week that are selected will be displayed at the top of the screen. The days
that have been deselected will not be visible (see Diagrams).
Press Enter to confirm, backlight will flash and return to the User Timer screen. With
highlighted press the Enter Button to activate User Timer, the backlight will flash and the
screen will return to the home screen.
Manual Mode - To choose a constant heat mode. This mode ignores the User Timer and
maintains the displayed temperature.
• Press Menu Button
• Press Up to highlight the Hand icon
• Press Enter Button
• Ensure is highlighted
• Press Enter Button
• Use Down and Up to adjust to the desired temperature
• Press Enter to Confirm
Frost protect - Frost protect mode maintains a room temperature of 7
o
C throughout a 24
hour period. This mode should be used to provide protection against frost as indicated by the
Frost icon.
• Press the Menu button
• Press Up twice to highlight the snowflake icon
• Press Enter to access the Frost protect menu
• Press Down or Up to adjust the Frost protect temperature setting
• Press Enter to confirm
Setting Modes
18
To Next Page
Loading...