Instructions
Newlec Helpline: 0800 783 6909
Standby - Select standby to switch o the heating element. Heat will not be provided.
To activate standby:
• Press Menu button
• Press Up to highlight the Hand icon
• Toggle to O
• Press Enter to confirm
The screen will appear blank
Sometimes you may be at home when you had not planned to be or need to leave when you
had planned to have heating on. You can change the way you use your heating temporarily; this
temporary change is achieved using the Advance function.
When a timer has been selected, the Advance function allows you to begin the next period
early. If the heater is in a Comfort O period and you want heat - press the Advance button.
The Advance icon will be displayed on the screen. If the heater is in the Comfort On and
you don’t want heat, press the Advance button and it will go o until the beginning of the next
Comfort On Period.
Advance
19
To Next Page
Loading...
