CONEX-CC Controller GUI Manual
4.2 Main
The Main tab displays the main controls in the Controller GUI like a virtual front
panel. It is updated each time the polling interval timer expires.
One Main tab by axis:
1. Main X
2. Main Y
“Initialization and Configuration”
In the “Initialization and Configuration” area, the first button changes the
controller status to “Enabled” or “Disabled”. To see the different controller
states, refer to the controller state diagram in section 1.3. The second button
“Save Pos.” memorizes the current positions (X and Y) in the combo box. As
soon as a new position is memorized, this is displayed in the trace.
“Current Position”
In the “Current Position” area, the current position X (or Y) is displayed in a
text box and visualized in a slider. The slider limits are defined with the ends
of run. An LED icon shows the current controller state. When the mouse
hovers over the LED icon, the controller state is displayed in an information
balloon.
EDH0277En1041 — 10/17 8
To Next Page
Loading...
