CONEX-CC Controller GUI Manual
3.0 Getting Started
3.1 Discover Instruments
Start the Controller GUI from Newport\MotionControl\CONEX-CC.
Next, click on “Discover” button and the number of instruments discovered will
appear. This window allows the user to select a com port where the desired instrument
is connected.
NOTE
When more than one CONEX-CC instrument is connected, this window allows
the user to switch the instruments between X and Y axes. To discern a com port
for a specific instrument, note their COM number in the Device Manager when
the connection is added.
Next, click “Launch Applet” button.
EDH0277En1041 — 10/17 4
To Next Page
Loading...
