To Next PageTo Next Page
Need help?Do you have a question about the Newport 5600 Series and is the answer not in the manual?
Provides an overview of the manual's content and scope.
Details the features, capabilities, and design of the Model 5600.
Lists optional equipment and accessories compatible with the Model 5600.
Explains safety terminology and symbols used throughout the manual.
Outlines critical safety warnings and precautions for operating the instrument.
Introduces the chapter's focus on operating the 5600 Laser Diode Driver.
Covers setup steps including power, mounting, and quick start.
Describes the functions of each control and display element on the front panel.
Explains display elements, menus, and system controls for basic operation.
Details the various connectors and ports located on the rear panel of the unit.
Provides guidelines for operating temperature and warm-up procedures for optimal performance.
Discusses features and protection requirements for CW and QCW laser diode operation.
Details safety mechanisms that automatically shut off laser output.
Describes the pinouts and connections for lasers, detectors, and interlocks.
Provides instructions and precautions for connecting laser diodes to the driver.
Guides users through setting up and operating the laser driver modes and parameters.
Introduces the chapter on the internal workings and theory of the 5600.
Explains the functional blocks and operational theory of the laser driver.
Details the components and functions of the microprocessor control board.
Describes the power supply architecture and its role in system operation.
Explains the function and importance of the laser interlock system for safety.
Introduces practical advice and application examples for the Model 5600.
Covers current, compliance, and photodiode limits for laser diode protection.
Explains how to use external modulation for controlling laser output.
Provides guidance on proper grounding techniques to prevent damage and noise.
Details the noise measurement methodology and specifications of the driver.
Explains the feature that detects and responds to connection interruptions.
Describes how forward voltage (Vf) is measured and its limitations.
States that no user-serviceable parts are inside the unit.
Provides instructions for safely replacing fuses, including type and voltage ratings.
Advises on proper cleaning procedures using mild soap and water.
Explains that calibration is done internally and can be local or remote.
Guides users through the process of calibrating the laser driver for accurate operation.
Informs the user not to attempt maintenance beyond specified procedures.
Instructs users on how to contact Newport for service and information required.
Explains that error messages indicate issues in the 5600's functions.
Details the output current range, resolution, accuracy, and stability.
Specifies the voltage compliance and current limit ranges and resolutions.
Outlines parameters for pulsed operation and modulation capabilities.
Lists display types, controls, connectors, and communication interfaces.
Covers power requirements, operating conditions, and laser safety features.
General
