Newport 5600 Series - Calibration Menu; Figure 5 - Calibration Menu; Figure 6 - Save;Recall Menu; Save;Recall Menu

Chapter 2 System Operation 13
Lockout Dial
disables the dial to avoid accidental changes in active data
fields if the dial is bumped.
Lockout Pad
locks out the left and right arrow keys, the data entry portion
on the keypad. Navigation keys, such as up and down,
MENU
,
MASTER
,
and
FUNC
continue to work.
2.4.3.4.1 Calibration Menu
The calibration menu is used to access the 5600 calibration functions. Only
qualified persons who fully understand the calibration procedure should
perform these calibrations. Each of the calibration procedures are described
if detail in Chapter 7.
Calibrate LDD PUL
Im
Vf
Iop
Figure 5 - Calibration Menu
Because these are soft buttons, to use any of the calibration functions, first
select the function, then press the right arrow key.
For each of the functions, see the following sections:
Io calibration: section 7.2.2.
Im calibration: section 7.2.4.
Vf calibration: section 7.2.6.
Pulse width and frequency calibration: section 7.2.8.
2.4.3.5 Save/Recall Menu
Save/Recall SAV
→
→→
→
Bin= 1
RCL
Figure 6 - Save/Recall Menu
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com