Newport 5600 Series - Figure 4 - System Configure Menu; System Menu

12 Chapter 2 System Operation
2.4.3.4 System Menu
The system configure menu controls basic operation of the 5600 system.
System



→
→→
→
Contrast= 11 %



Brightness= 100 %



Lockout Dial= No



Lockout Pad= No



Audible beep= Yes



On Delay= 3.0 S



Key Rate= Fast



Dial Rate= Fast
Figure 4 - System Configure Menu
Brightness
varies the back lighting intensity.
Contrast
is used to optimize
the viewing angle.
Audible Beep
controls the system’s audible beeper. The beeper indicates
errors, invalid data entry, and other situations where the 5600 needs to alert
the user.
On Delay
controls the delay time from the moment a Laser Diode Driver is
turned on by the user to the actual time the output is energized. The delay
time is programmable from 0 seconds to 30 seconds. The default setting is 3
seconds.
Key Rate
- this controls the speed at which, when a key is held down, it
repeats. Settings are
Slow
,
Medium
, and
Fast
.
Dial Rate
- like the
Key Rate
setting, this controls the acceleration of the
dial as it is turned. Settings are
Slow
,
Medium
, and
Fast
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com