2 Chapter 1 General Information
against transients. Additional filtering and power regulation stages coupled
with high speed transient detection circuits let you operate your laser diode
worry-free from transients. A slow turn-on sequence, multiple output
shorting circuits, and an independent current limiting feature provide the
superior protection you demand from all your laser diode instrumentation.
Intuitive Controls and Character LCD Display Simplify Control and Test
Procedures
Improved data presentation and system control are achieved using a
character LCD display. Control of the output is accomplished either by
entering the set point via the cursor keys or control dial. MENU keys access
saved system configurations and repetitive procedures. All controls are
clearly marked and instructions easily understood for simple operation.
GPIB/IEEE-488.2 and RS232 Interfaces Gives Power to Remotely
Control and Collect Data.
For ultimate control a GPIB/IEEE-488.2 interface is available. All control
and measurement functions are accessible via the GPIB interface. In
addition, standard serial RS-232C ports allow simpler interfacing to a PC.
1.3 Available Options and Accessories
Accessories
5600-02 Laser Diode 1 Meter Driver Cable
5600-04 Laser Diode 1 Meter Driver/Mount Cable
5600-RACK Rack Mount Kit
Newport Corporation also supplies temperature controlled mounts, lenses,
and other accessories. Please consult with your representative for additional
information.
1.4 Safety Terms and Symbols
1.4.1 Terms
The following safety terms are used in this manual:
The
WARNING
heading in this manual explains dangers that could result in
personal injury or death.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
