49
CHAPTER 6
6.
Maintenance
6.1 Introduction
There is no user serviceable parts inside the unit, do not attempt to remove
the cover.
6.2 Fuse Replacement
The fuses are accessible on the back panel of the 5600. Before replacing a
fuse, turn power off and disconnect the line cord. Use only the fuses
indicated below.
Fuse Replacement
Line Voltage
6 Amps, 3 AG, T 250V 100/120/220/240 VAC
6.3 Cleaning
Use mild soap solution on a damp but not wet cloth. Disconnect AC power
before cleaning.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
