CONEX-CC Controller GUI Manual
Delete a memorized position: Select an item from the combo box, right-click
on the mouse and select the “Delete” menu to delete the selected memorized
position.
Tracking panel and mouse
The current position is represented by a black spot.
The amplitudes (X and Y) are defined with the ends of run.
First click (middle mouse button) enters the tracking mode and the mouse
cursor position is attached to the current position. As soon as the tracking
mode is activated, the cursor is represented by a hand and the CONEX-
CC goes to the TRACKING state. Next, each mouse move generates a
displacement command. The second click (middle mouse button) exits the
tracking mode.
The wheel button increases or decreases the sensitivity..
A right double-click memorizes the current positions (X and Y) in the combo
box. Each new memorized position is displayed in the trace.
Default mouse configuration:
NOTE
The mouse configuration can be modified in the “Configuration” tab.
To Next Page
Loading...
