EasyManua.ls Logo

Newport Vibration Control System - Page 30

Default Icon
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MKS Instruments, Inc. Page 1 of 2 Document Number: MKS-CD-1138
MKS CONFIDENTIAL Revision: B
RoHS
(Restriction of Hazardous Substances)
Certificate of Compliance
MKS Instruments, Inc. hereby certifies that the products listed in the table below are compliant
with the European Union’s RoHS directive 2011/65/EU (effective 22 July 2017) regarding the
restriction of the use of certain hazardous substances in electrical and electronic equipment. The
products listed below are compliant to RoHS requirements for concentration limitations, by weight
of homogeneous material, of the following six substances:
Lead
<0.1% (1000 PPM)
Mercury
<0.1% (1000 PPM)
Cadmium
<0.01% (100 PPM)
Hexavalent Chromium
<0.1% (1000 PPM)
Polybrominated Biphenyls (PBB)
<0.1% (1000 PPM)
Polybrominated Diphenyl Ethers (PBDE)
<0.1% (1000 PPM)
Product
RoHS Compliant Part Number
SUPPORT SYSTEM,TIE BAR,S-2000
S-2000A-428-TC
The above thresholds are not in place for any legally allowable exemptions per Annex III of the
aforementioned directive. If such exemptions are in use, they are noted on the attached table. If no
exemptions are in use, then no further information is provided.
All information provided in this Certificate of Compliance is accurate to MKS’ knowledge as of the
date of this certification. This confirmation is made based our internal engineering risk analysis of
the individual items possibly being present along with the best technical information made available
to MKS from its material suppliers.
_____________6/6/18_________________
Date

Table of Contents

Related product manuals