Newport Vibration Control System - Section 2 - Assembly; Assembling the System; Positioning the Isolators

6
Section 2
Assembly
2.1.1 Table Installation Assistance
Optical tables are heavy. Even a small table top weighs over 500 pounds
(227 Kg). Contact Newport or your local sales representative for help in
preparing your facility.
2.1.2 Positioning the Isolators
Figure 2.1 shows the correct isolator positions for standard table sizes.
Table 2.1 shows the correct dimensions (A, B, & C) for each table size. If
your table is not listed, the isolator positions for your table will be included
in the data package provided with the system.
A
C
B Typ.
6" (152 mm)
4 PL
Figure 2.1 — Isolator Position
Table 2.1 — Isolator Positions
Table Length Distance A Distance B Distance C
6' 40" 987mm 16" 406mm 6" (152mm)
8' 52" 1282mm 22" 559mm from edge of
10' 66" 1628mm 27" 686mm table
12' 80" 1974mm 32" 813mm
14' 94" 2420mm 37" 940mm
16' 104" 2565mm 42" 1087mm
18' 120" 2962mm 47" 1194mm
20' 134" 3308mm 53" 1346mm
Assembling
the System
2.1