7
ICARUS SERIES
2. Installation and Connection
2.1 Display installation
Installation instructions
• This machine should be installed adjacent to an easily pluggable AC power socket.
• For the sake of safety, we suggest that suitable wall-mounted bracket or base be used.
• In order to prevent injury, this machine shall be placed on a stable and level surface or fixed on a firm wall.
• For wall-mounting, please ask a professional to do so. Improper installation may cause instability of this machine.
• DO NOT place this machine in places with mechanical vibration.
• DO NOT place this machine in places where insects are accessible.
• DO NOT install this machine directly opposite to air-conditioner, otherwise its inner panel may be dewed and cause failure.
• DO NOT place this machine in places with strong electromagnetic field, otherwise it may be interfered by the electromagnetic
wave and get damaged.
Mounted on Wall Mounted on Base
Ventilation
• Please reserve some place as indicated in the figure around the display.
• Never cover the vents or insert any object into the shell.
• DO NOT place this machine in confined space such as book case or embedded closet, unless such space is well ventilated.
2.2 Signal line connection
Connect the signal line to output interfaces signal of DP/HDMI
signals of PC, and then connect the other end of the signal line
to the corresponding signal input port of the display.
2.3 Audio output
This machine supports earphone and external speaker
audio output.
To Next Page
Loading...
Need help?
General
