Nexa ZED 2951 - Bluetooth HID RSSI Setting; Bluetooth BLE Mode; Bluetooth Name Setting; Bluetooth Name Bar-Code Definition

8.6 Bluetooth HID RSSI Setting
Bluetooth SPP Mode
Scan the “Bluetooth SPP Mode” bar-code to enter, and it can be matched directly in the broadcast
state by default.
8.7 Bluetooth BLE Mode
Bluetooth BLE Mode
Scan the “Bluetooth BLE Mode” bar-code, it will automatically enter into the Bluetooth BLE
mode, and automatically connect the Bluetooth that was matched last time by default. If it is not
connected, it will automatically be in the broadcast state and can be matched directly.
8.8 Bluetooth Name Setting
8.8.1
Bluetooth Name Bar-code Definition
Bluetooth Name Bar-code Definition
1. Fixed front character“^&C0C&^”,‘XXX’ is the name needed to be set.
2. The Bluetooth name can be set to 24 bytes at most.
*Remarks:
The name of Bluetooth HID/SPP/BLE will all changed after modifying.